The effect of lubrication conditions on belt finishingKHELLOUKI, Abdeljabar; RECH, Joël; ZAHOUANI, Hassan et al.International journal of machine tools & manufacture. 2010, Vol 50, Num 10, pp 917-921, issn 0890-6955, 5 p.Article

A numerical simulator to predict the dynamical behavior of the self-vibratory drilling headGUIBERT, Nicolas; PARIS, Henri; RECH, Joël et al.International journal of machine tools & manufacture. 2008, Vol 48, Num 6, pp 644-655, issn 0890-6955, 12 p.Article

Tool coatings influence on the heat transfer in the tool during machiningKUSIAK, Andrzej; BATTAGLIA, Jean-Luc; RECH, Joël et al.Surface & coatings technology. 2005, Vol 195, Num 1, pp 29-40, issn 0257-8972, 12 p.Article

Determination of friction in metal cutting with tool wear and flank face effectsGRZESIK, Wit; RECH, Joël; ZAK, Krzysztof et al.Wear. 2014, Vol 317, Num 1-2, pp 8-16, issn 0043-1648, 9 p.Article

Characterisation of friction properties between a laminated carbon fibres reinforced polymer and a monocrystalline diamond under dry or lubricated conditionsMONDELIN, Alexandre; FURET, Benoit; RECH, Joël et al.Tribology international. 2010, Vol 43, Num 9, pp 1665-1673, issn 0301-679X, 9 p.Article

Identification of thrust force models for vibratory drillingGUIBERT, Nicolas; PARIS, Henri; RECH, Joël et al.International journal of machine tools & manufacture. 2009, Vol 49, Num 9, pp 730-738, issn 0890-6955, 9 p.Article

Simulation du phénomène de talonnage en perçage vibratoire auto-entretenu = Simulation of the ploughing effect on self vibratory drillingGUIBERT, Nicolas; PARIS, Henri; RECH, Joël et al.Mécanique & industries. 2007, Vol 8, Num 5, pp 471-479, issn 1296-2139, 9 p.Conference Paper

Influence of twist drill geometry on chip split with self vibratory drilling headÖNDER, Olcay; PARIS, Henri; RECH, JoËl et al.Mécanique & industries. 2012, Vol 13, Num 1, pp 11-16, issn 1296-2139, 6 p.Article

Machinability of PF nodular cast iron with silicon nitride ceramic toolsGRZESIK, Wit; ZAK, Krzysztof; RECH, Joel et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 1-2, pp 1-15, issn 1748-5711, 15 p.Article

Characterization of friction properties at the workmaterial/cutting tool interface during the machining of randomly structured carbon fibers reinforced polymer with carbide tools under dry conditionsKLINKOVA, Olga; RECH, Joël; DRAPIER, Sylvain et al.Tribology international. 2011, Vol 44, Num 12, pp 2050-2058, issn 0301-679X, 9 p.Article

MODELLING OF MACHINING PROCESSESRECH, Joël; DOGUI, Abdelwaheb; BEN SALEM, Wacef et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, issn 1748-5711, 159 p.Serial Issue

Calibration of the insert/tool holder thermal contact resistance in stationary 3D turningMONDELIN, Alexandre; VALIORGUE, Frederic; FEULVARCH, Eric et al.Applied thermal engineering. 2013, Vol 55, Num 1-2, pp 17-25, issn 1359-4311, 9 p.Article

Experimental study of coated carbide tools behaviour: application for Ti-5-5-5-3 turningWAGNER, V; BAILI, M; DESSEIN, G et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 233-248, issn 1748-5711, 16 p.Article

Emissivity calibration for temperatures measurement using thermography in the context of machiningVALIORGUE, Frédéric; BROSSE, Alexandre; NAISSON, Pierre et al.Applied thermal engineering. 2013, Vol 58, Num 1-2, pp 321-326, issn 1359-4311, 6 p.Article

Identification of a Friction Model at the Tool-Chip-Workpiece Interface in Dry Machining of a AISI 1045 Steel With a TiN Coated Carbide ToolHAMDI BEN ABDELALI; COURBON, Cedric; RECH, Joël et al.Journal of tribology. 2011, Vol 133, Num 4, issn 0742-4787, 042201.1-042201.11Article

3D modeling of residual stresses induced in finish turning of an AISI304L stainless steelVALIORGUE, Frederic; RECH, Joël; HAMDI, Hédi et al.International journal of machine tools & manufacture. 2012, Vol 53, Num 1, pp 77-90, issn 0890-6955, 14 p.Article

High-efficiency grinding of cold-work die steel with ultrafine-crystalline cBN abrasive grainsICHIDA, Yoshio; NABIL BEN FREDJ.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 197-208, issn 1748-5711, 12 p.Article

Experimental study of abrasive processBARGE, Matthieu; RECH, Joël; HAMDI, Hédi et al.Wear. 2008, Vol 264, Num 5-6, pp 382-388, issn 0043-1648, 7 p.Conference Paper

Metal cutting modelling SPH approachLIMIDO, J; ESPINOSA, C; SALAUN, M et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 177-196, issn 1748-5711, 20 p.Article

State of the art in cutting modelling with ball end millBEN SAID, M; BOUZID, W; SAI, K et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 282-294, issn 1748-5711, 13 p.Article

Prediction of serrated chip formation in orthogonal metal cutting by advanced adaptive 2D numerical methodologyISSA, Mazen; SAANOUNI, Khemais; LABERGERE, Carl et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 295-315, issn 1748-5711, 21 p.Article

Numerical simulation of temperature distribution in a 3D ball end milling modelNASRI, Abdallah; TSOUMAREV, Oleg; BEN SAID, Mihed et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 209-222, issn 1748-5711, 14 p.Article

Residual stresses and metallurgic transformations induced by grindingYOUSSEF, S; BEN SALEM, W; BROSSE, A et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 223-232, issn 1748-5711, 10 p.Article

On the near-dry machining of SAE 300M steel: experimental and numerical investigationsVARGAS PEREZ, Raul Gustavo; TOUNSI, Nejah; ATTIA, Helmi et al.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 249-265, issn 1748-5711, 17 p.Article

2D high speed machining simulations using a new explicit formulation with linear triangular elementsDE MICHELI, P. O; MOCELLIN, K.International journal of machining and machinability of materials (Print). 2011, Vol 9, Num 3-4, pp 266-281, issn 1748-5711, 16 p.Article